SmartSolar MPPT 250/85-Tr VE.Can
$761.05
- Remote Control via VictronConnect: Easily manage and monitor your MPPT 250/85 VE.Can charger through Bluetooth via the VictronConnect app, with at-a-glance data on battery and PV voltages, currents, and historical info.
- Daisy Chain Multiple Units: Use CAN bus ports to daisy chain additional chargers, synchronizing their charge stages and sharing data with a single cable to a GX monitoring device.
- Remote Monitoring with VRM: Access full control and monitoring capabilities via the Victron Remote Management Portal (VRM) when connected to the internet.
- SmartSolar Control Display: Equipped with a VE.Direct port for unit monitoring or streetlight control. The remote on/off feature allows control by third-party devices, such as lithium batteries.
High-Efficiency Solar Charging
The Victron SmartSolar MPPT 250/85-Tr VE.Can charger uses advanced MPPT technology to efficiently convert solar energy into optimal battery charging. It supports a maximum Voc of 250V and can charge 12V, 24V, or 48V battery banks with up to 85A of charge current. With Bluetooth connectivity through the VictronConnect app, users can remotely manage and monitor the device, access real-time data on battery and PV voltage, current, and historical performance.
| Weight | 4.5 lbs |
|---|---|
| Dimensions | 16 × 33 × 29 in |
Related products
BlueSolar MPPT 150/100-Tr VE.Can
-
Smarter Solar Conversion: Convert sunlight into stored energy efficiently while maintaining battery life with SmartSolar MPPT.
-
Dynamic Power Tracking: Fast MPPT response ensures peak performance in shifting sunlight or partial shading.
-
Secure Load Output Management: Automatically disconnect loads at low voltage to protect batteries and power priority devices.
-
Multi-Device Compatibility: Configure and control through VictronConnect, with performance logs and instant data feedback.
-
Expandable System Design: Pair multiple SmartSolar controllers to work together in large-scale or modular installations.
-
Auto-Adjust Charging: Adaptive algorithms optimize charging phases to suit varying battery conditions.
BlueSolar MPPT 150/60-Tr
-
Efficient Smart Charging: Harness solar power efficiently with Victron’s SmartSolar MPPT controller, intelligently managing energy to extend battery life.
-
Ultra-Fast MPPT Tracking: Even in partial shade, advanced tracking ensures optimal energy yield from every sunbeam.
-
Smart Load Output Control: Prevent battery over-discharge by configuring cut-off voltage for connected loads.
-
Multiple Unit Synchronization: Synchronize multiple MPPT controllers for coordinated charge stages and balanced energy flow.
-
App-Based Control: Easily configure, monitor, and update through VictronConnect with real-time stats and 30-day history.
-
Flexible System Integration: Seamlessly supports diverse solar setups, off-grid systems, and hybrid configurations.
BlueSolar MPPT 250/100-Tr VE.Can
-
Efficient Solar Power Conversion: Maximize your solar energy harvest with the latest MPPT technology that intelligently converts solar energy into stored power in the shortest time.
-
Deep Battery Recharge: Capable of charging a severely depleted battery with a voltage as low as 0V (provided the cells are not permanently damaged or sulphated).
-
Advanced MPPT Technology: Constantly monitors the voltage and current from your solar panels to ensure every bit of available power is collected and stored efficiently.
-
Remote Monitoring and Control: Easily control and monitor the performance of your system via Bluetooth using VictronConnect on your smartphone or device, no matter where you are.
-
Intelligent Load Output Protection: Prevents over-draining your battery by automatically disconnecting the load when the battery voltage falls below a user-configured level, preserving battery life.
SmartSolar MPPT 150/35
-
Smart Solar Charge Controller: Efficiently converts solar energy into usable power while optimizing battery health and lifespan.
-
Maximize Power Output: Advanced MPPT technology ensures maximum power harvest, even in shaded or low-light conditions.
-
Synchronized Charging: Supports multiple MPPT controllers working together to ensure system-wide battery charging consistency.
-
Connectivity: Monitor and configure settings via the VictronConnect app with real-time data, performance logs, and system alerts.
-
Intelligent Load Output: Automatically disconnects loads when battery voltage is low to protect batteries from deep discharge.
SmartSolar MPPT 150/70-Tr VE.Can
- Ultra-Fast Maximum Power Point Tracking: Automatically detects and charges your 12, 24, or 48V battery bank with adjustable current settings from 70A to 100A.
- Fully Programmable Charge Settings: Supports various battery chemistries, including lead-acid and lithium, for customized charging.
- Remote Control via VictronConnect: Manage and monitor settings, battery voltage, PV voltage, and historical data through Bluetooth and the VictronConnect app.
- Daisy Chain Multiple Units: Connect multiple VE.Can SmartSolar chargers via CAN bus for synchronized charging and single data reporting.
- Remote Monitoring via VRM: Monitor your system remotely via the Victron Remote Management Portal or, for off-grid use, through the GlobalLink 520.
- SmartSolar Control Display
Equipped with a VE.Direct port for single unit monitoring or streetlight control, with optional LCD display for live data and control.
SmartSolar MPPT 150/85-Tr VE.Can
- Ultra-Fast Maximum Power Point Tracking: Connects to a 150V Voc PV array and charges 12, 24, or 48V batteries with an 85A charge current.
- Remote Control via VictronConnect: Remotely configure, monitor, and manage settings like battery and PV voltage, current, and historical data through Bluetooth.
- Daisy Chain Multiple Units: Daisy chain up to 25 units via CAN bus ports for synchronized charging and data sharing to a GX monitoring device.
- Remote Monitoring with VRM: Monitor and control your system remotely through the Victron Remote Management Portal (VRM) when connected to the internet.
- SmartSolar Control Display: Includes VE.Direct port for single unit or streetlight control. Optional pluggable LCD display for live data and setup.
- Multiple Controller Solution: Supports synchronization of up to 25 units with VE.Can for enhanced system efficiency.
English 
French