Phoenix Inverter 12/1200 120V VE.Direct NEMA 5-15R
$369.92
-
VE.Direct communication supports Bluetooth Smart Dongle for easy connectivity
-
Reliable performance with full-bridge toroidal transformer design and overload protection
-
High start-up power for demanding devices like power tools and LED/halogen lamps
-
ECO mode saves energy by switching to standby during low loads and reactivating when needed
-
Remote control & LED diagnostics plus compatibility with Filax for fast switchover under 20ms
Power Your World Anywhere
The Victron Energy Phoenix Inverter delivers stable 120V AC power from 12V, 24V, or 48V batteries perfect for vehicles, boats, and off-grid setups. Built tough for reliable performance wherever you need it.
| Dimensions | 32.7 × 23.2 × 11.7 in |
|---|
Related products
MultiPlus 12/2000/80-50 120V VE.Bus (UL 458)
-
Up to 6 MultiPluses can operate in parallel, delivering 15kW/12kVA output and 420A charging capacity.
-
Supports three-phase power setup with 3 units.
-
PowerControl limits charging current to prevent overloading shore or generator input.
-
PowerAssist supplements grid/generator power with battery during short peak demands.
-
Dual-bank charging with adaptive 4-stage algorithm for efficient battery maintenance.
-
Easy configuration via DIP switches for quick system adjustments post-installation.
MultiPlus Compact 12/2000/80-50 120V VE.Bus (UL 458)
-
wo AC outputs: Main output ensures seamless switch (<20ms); second output prevents unnecessary battery drain
-
Parallel operation: Connect up to 6 units for 15kW/18kVA output and 420A charging
-
PowerControl & PowerAssist: Manages generator/shore power limits and boosts short-term peak power with battery support
-
Three-phase support: Capable of delivering 3-phase power with 3 units
-
Adaptive 4-stage charger: Smart charging tailored to battery condition with dual bank support
-
Simple configuration: Quick setup with DIP switches and optional Multi-Control panel
MultiPlus-II 24/3000/70-50 120V (UL 458)
-
Power Assist – Prevents overloading of limited AC sources, automatically reducing battery charging, and boosting generator or shore power when needed.
-
Energy Storage System (ESS) – Essential for integrating with MPPT Solar Chargers or Grid-tie PV Inverters for efficient energy management.
-
Uninterrupted AC Power (UPS Function) – Provides seamless backup power within 20 milliseconds during grid or power source failures, ensuring continuous operation of sensitive electronics.
-
Remote Monitoring and Control – Allows local or remote monitoring and control via the GX device and free VRM app or portal, offering full system management from any device.
MultiPlus-II 24/3000/70-50 2x120V (UL 458)
-
PowerControl and PowerAssist – Enhances the grid or generator capacity by managing energy usage and preventing overloads.
-
Two AC Outputs – Provides reliable power distribution for connected devices.
-
Parallel and Three-Phase Operation – Supports scalable power output for virtually unlimited capacity.
-
On-Site Configuration, Monitoring, and Control – Enables easy system adjustments and monitoring at the installation site.
-
Remote Configuring and Monitoring – Allows full system control and monitoring remotely through the internet for convenient management.
Quattro 12/5000/220-100/100 120V VE.Bus
-
Two AC Inputs with Integrated Transfer Switch – Connects to two independent AC sources and automatically switches to the active source.
-
Two AC Outputs – Main output with no-break functionality for sensitive electronics, second output only active when AC is available.
-
Split Phase and Three-Phase Capability – Supports up to 4 sets of 3 units in parallel, providing up to 96W/120kVA and 1600A charging.
-
PowerControl and PowerAssist – Optimizes generator/shore power use and supplements capacity with battery power during peak demand.
-
Solar-Powered Systems – Works in off-grid and grid-connected systems, ensuring AC power even during grid failure.
-
Easier System Configuration – Quick adjustments with DIP switches after installation for efficient setup.
Quattro 48/3000/35-50/50 120V VE.Bus
-
Two AC Inputs with Integrated Transfer Switch: Automatically switches between two AC sources (e.g., grid and generator) for seamless operation and efficiency.
-
Two AC Outputs: Main output ensures no-break functionality (<20ms) for sensitive devices; secondary output activates only when AC is available, preserving battery life.
-
PowerControl: Optimizes limited generator or shore power by using excess energy for battery charging, preventing overloads.
-
PowerAssist: Enhances generator or shore power capacity by drawing from the battery during peak demand for continuous operation.
-
Split Phase and Three-Phase Capability: Enables parallel operation of up to 12 units, providing up to 96W/120kVA output and 1600A charging capacity.
-
Solar Compatibility: Perfect for off-grid or grid-tied PV systems, with integrated loss-of-mains detection software.
-
Effortless System Configuration: Simple adjustments with DIP switch settings for fast customization after installation.
Quattro-II 12/3000/120-50/50 2x120V
-
PowerControl & PowerAssist: Boosts the capacity of the grid or a generator by managing the power usage and battery charging effectively.
-
Two AC Inputs and Two AC Outputs: Allows flexibility in power sourcing and distribution for various loads.
-
Virtually Unlimited Power: Achieved through parallel operation and three-phase capabilities, providing scalable power output and charging.
-
On-Site System Configuration, Monitoring, and Control: Simplifies on-site adjustments and management of the system.
-
Remote Configuration and Monitoring: Enables remote access for system control and monitoring, offering convenience and flexibility.
