SmartSolar MPPT 250/100-Tr VE.Can
$849.41
- Ultra Fast Maximum Power Point Tracking: Automatically detects and charges your 12, 24, or 48V battery bank with a charge current of 100A, connected to a PV array with a maximum voltage of 250V Voc.
- Remote Control via VictronConnect: Remotely control and configure your charger via Bluetooth using the VictronConnect app, providing real-time data like battery voltage, PV voltage, and historical performance.
- Daisy Chain Multiple Units: Easily connect additional VE.Can SmartSolar chargers using CAN bus ports. Synchronize charge stages and share data with a single cable connected to a GX monitoring device.
- Remote Monitoring with VRM: When connected to the internet, use the Victron Remote Management Portal (VRM) for full control and monitoring of your solar charger.
- SmartSolar Control Display: The VE.Can SmartSolar charger features a VE.Direct port for monitoring or streetlight control. The remote on/off function is compatible with third-party devices like lithium batteries.
Powerful Solar Charging Solution
The Victron SmartSolar MPPT 250/100-Tr VE.Can efficiently converts solar energy to charge your battery bank with up to 100A of current. It supports a maximum PV array voltage of 250V and is compatible with 12V, 24V, or 48V battery banks. Through Bluetooth connectivity, the VictronConnect app allows remote control and monitoring of the system, providing real-time data on battery and PV voltage, current, and historical performance for optimal energy management.
| Poids | 4.5 livres |
|---|---|
| Dimensions | 16 × 33 × 29 pouce |
Produits similaires
BlueSolar MPPT 150/45
-
MPPT with Real-Time Tracking – Constantly tracks PV voltage and current to capture every possible watt from your solar panels.
-
Bluetooth Enabled Monitoring – No dongle needed—built-in Bluetooth connects instantly to your device using VictronConnect.
-
Remote Monitoring via VRM Portal – Monitor your solar system remotely through the internet, ideal for professional or residential setups.
-
Off-Grid Ready with GlobalLink 520 – Enables remote data tracking even in isolated locations without wired internet access.
-
Battery Management Features – Advanced charging algorithms ensure your batteries remain protected and charged efficiently.
-
Cloud-Adaptive Performance – Especially effective during fluctuating light conditions, maximizing efficiency even on cloudy days.
BlueSolar MPPT 250/100-Tr VE.Can
-
Efficient Solar Power Conversion: Maximize your solar energy harvest with the latest MPPT technology that intelligently converts solar energy into stored power in the shortest time.
-
Deep Battery Recharge: Capable of charging a severely depleted battery with a voltage as low as 0V (provided the cells are not permanently damaged or sulphated).
-
Advanced MPPT Technology: Constantly monitors the voltage and current from your solar panels to ensure every bit of available power is collected and stored efficiently.
-
Remote Monitoring and Control: Easily control and monitor the performance of your system via Bluetooth using VictronConnect on your smartphone or device, no matter where you are.
-
Intelligent Load Output Protection: Prevents over-draining your battery by automatically disconnecting the load when the battery voltage falls below a user-configured level, preserving battery life.
BlueSolar MPPT 250/70-Tr VE.Can
-
Solar Made Smarter: SmartSolar ensures your solar power is harvested efficiently while taking care of your battery’s health.
-
Precision MPPT Technology: Advanced tracking captures max power—even on cloudy days or with partial panel shading.
-
Customizable Load Output: Set disconnect thresholds and power your devices directly from the charge controller.
-
Bluetooth Enabled: Built-in connectivity lets you access real-time insights and historical data via VictronConnect.
-
System Sync Support: Multiple controllers can act as one—ensuring synchronized charging and optimized energy distribution.
-
Firmware & Settings Control: Quickly configure battery types, set alarms, and keep your system up-to-date from your phone.
SmartSolar MPPT 150/35
-
Smart Solar Charge Controller: Efficiently converts solar energy into usable power while optimizing battery health and lifespan.
-
Maximize Power Output: Advanced MPPT technology ensures maximum power harvest, even in shaded or low-light conditions.
-
Synchronized Charging: Supports multiple MPPT controllers working together to ensure system-wide battery charging consistency.
-
Connectivity: Monitor and configure settings via the VictronConnect app with real-time data, performance logs, and system alerts.
-
Intelligent Load Output: Automatically disconnects loads when battery voltage is low to protect batteries from deep discharge.
SmartSolar MPPT 150/60-Tr
-
Smart Solar Charging: Designed for maximum efficiency, the SmartSolar MPPT 150/60-Tr converts every ray of sunlight into usable power while maintaining optimal battery health over time.
-
Optimized Energy Harvesting: The ultra-fast MPPT algorithm tracks the optimal power point in real time—even during partial shading—ensuring you get the most from your solar panels.
-
Synchronized Charging Support: When used with other SmartSolar controllers, the 150/60-Tr supports synchronized charge stages, promoting consistent and extended battery life across your system.
-
Advanced Remote Connectivity: Built-in Bluetooth and VictronConnect app support allow you to monitor real-time stats, review performance history, update firmware, and customize settings on the go.
-
Protective Load Output Control: Configure the controller to disconnect loads at a defined voltage, protecting your battery from over-discharge and enhancing long-term performance.
SmartSolar MPPT 150/70-Tr VE.Can
- Ultra-Fast Maximum Power Point Tracking: Automatically detects and charges your 12, 24, or 48V battery bank with adjustable current settings from 70A to 100A.
- Fully Programmable Charge Settings: Supports various battery chemistries, including lead-acid and lithium, for customized charging.
- Remote Control via VictronConnect: Manage and monitor settings, battery voltage, PV voltage, and historical data through Bluetooth and the VictronConnect app.
- Daisy Chain Multiple Units: Connect multiple VE.Can SmartSolar chargers via CAN bus for synchronized charging and single data reporting.
- Remote Monitoring via VRM: Monitor your system remotely via the Victron Remote Management Portal or, for off-grid use, through the GlobalLink 520.
- SmartSolar Control Display
Equipped with a VE.Direct port for single unit monitoring or streetlight control, with optional LCD display for live data and control.
SmartSolar MPPT 250/60-Tr
-
Smart Solar Charge Controller: Efficiently convert solar power into stored energy with the SmartSolar MPPT 250/60-Tr. Designed to optimize energy capture while maintaining battery health and longevity.
-
Maximized Power Output: Ultra-fast MPPT technology tracks the optimal power point in real time, ensuring maximum energy yield—even in low light or partially shaded conditions.
-
Multi-Unit Synchronized Charging: Integrate multiple SmartSolar MPPT controllers to charge in sync, enhancing overall system performance and improving battery life through coordinated charging stages.
-
Advanced App Connectivity: Monitor system performance, view historical data, and customize settings through the VictronConnect app via built-in Bluetooth—no additional hardware required.
-
Smart Load Management: Protect your batteries with the intelligent load output feature that disconnects power to devices automatically when voltage drops below a set threshold.
SmartSolar MPPT 250/70-Tr
Smart Solar Charge Controller: Efficiently converts solar power into stored energy while enhancing battery longevity.
Maximize Power Output: Tracks the optimal power point to ensure maximum energy yield, even in low light or shade.
Synchronized Charging for Multi-Unit Setups: Synchronizes multiple units to optimize charging efficiency and battery health.
Comprehensive Connectivity: Monitor and control your system via the VictronConnect app with Bluetooth.
Intelligent Load Output Protection: Automatically disconnects loads when battery voltage drops below a set threshold.
French 
English