BlueSolar MPPT 150/60-Tr
$441.89
-
Efficient Smart Charging: Harness solar power efficiently with Victron’s SmartSolar MPPT controller, intelligently managing energy to extend battery life.
-
Ultra-Fast MPPT Tracking: Even in partial shade, advanced tracking ensures optimal energy yield from every sunbeam.
-
Smart Load Output Control: Prevent battery over-discharge by configuring cut-off voltage for connected loads.
-
Multiple Unit Synchronization: Synchronize multiple MPPT controllers for coordinated charge stages and balanced energy flow.
-
App-Based Control: Easily configure, monitor, and update through VictronConnect with real-time stats and 30-day history.
-
Flexible System Integration: Seamlessly supports diverse solar setups, off-grid systems, and hybrid configurations.
MPPT Solar Charger – Intelligent Energy Harvesting
This advanced MPPT solar charge controller collects power from your solar panels and efficiently stores it in your batteries. With high-speed tracking, it ensures maximum energy harvest and extends battery life by maintaining a consistent, optimal charge.
Unlike basic PWM models that directly link panel voltage to battery voltage, MPPT controllers intelligently regulate voltage, allowing a higher voltage panel array to charge lower voltage batteries with minimal power loss. This results in better performance, especially in cooler or changing climates. It’s ideal for larger arrays, where wiring efficiency and power optimization matter most.
| Poids | 3.88 livres |
|---|---|
| Dimensions | 15 × 27 × 25 pouce |
Produits similaires
BlueSolar MPPT 150/45
-
MPPT with Real-Time Tracking – Constantly tracks PV voltage and current to capture every possible watt from your solar panels.
-
Bluetooth Enabled Monitoring – No dongle needed—built-in Bluetooth connects instantly to your device using VictronConnect.
-
Remote Monitoring via VRM Portal – Monitor your solar system remotely through the internet, ideal for professional or residential setups.
-
Off-Grid Ready with GlobalLink 520 – Enables remote data tracking even in isolated locations without wired internet access.
-
Battery Management Features – Advanced charging algorithms ensure your batteries remain protected and charged efficiently.
-
Cloud-Adaptive Performance – Especially effective during fluctuating light conditions, maximizing efficiency even on cloudy days.
BlueSolar MPPT 150/70-Tr
-
Maximize Solar Harvesting: SmartSolar uses cutting-edge MPPT tech to draw every bit of power from your panels, even in inconsistent lighting.
-
Battery-Safe Charging Logic: Adaptive charging stages help preserve battery health while maximizing performance.
-
Real-Time Monitoring: Use VictronConnect to configure and track your system from your smartphone, tablet, or computer.
-
Multi-Unit Charging Sync: Combine controllers for unified charge stage progression, ensuring better battery management.
-
Smart Load Disconnection: Protect batteries from deep discharge by setting custom low-voltage disconnect thresholds.
-
User-Friendly Configuration: Easily update settings, set alerts, and apply presets with a few taps.
SmartSolar MPPT 100/15 Retail
-
Smart Solar Charge Controller: Charge your batteries efficiently with the Victron Energy SmartSolar MPPT controller, ensuring optimal energy conversion from every ray of sunlight while extending battery life.
-
Maximize Power Output: Advanced MPPT technology continuously tracks the optimal voltage and current to extract maximum energy, even in partially shaded or changing light conditions.
-
Synchronized Charging: Multiple SmartSolar controllers can operate in sync, optimizing the charging process across all units and enhancing system-wide battery performance.
-
Connectivity via VictronConnect: Built-in Bluetooth allows you to monitor and configure your system in real time using the VictronConnect app, with access to performance history and settings customization.
-
Intelligent Load Output: Protect your batteries by configuring load disconnection thresholds. The controller will automatically shut down connected devices if voltage drops too low, preventing deep discharge.
SmartSolar MPPT 100/20 (up to 48V) Retail
-
Smart Solar Charging: Efficiently converts every bit of sunlight into usable energy while optimizing battery longevity.
-
Maximize Power Output: Lightning-fast MPPT tracking ensures the maximum possible power output, even under partially shaded conditions.
-
Synchronized Charging: Sync multiple SmartSolar MPPT controllers to work as one, improving energy efficiency and enhancing system performance.
-
Connectivity: Use the VictronConnect app for real-time data, 30-day performance history, device configuration, and firmware updates.
-
Intelligent Load Output: Safely power devices directly from the solar charger while preventing battery drain by disconnecting loads at low voltage.
SmartSolar MPPT 100/50
-
Smart Solar Charge Controller: Convert every ray of sunlight into usable energy, optimizing battery life.
-
Maximize Power Output: Ultra-fast MPPT tracking ensures maximum energy harvest, even with partially shaded panels.
-
Synchronized Charging: Sync multiple controllers for unified charge stages, boosting system efficiency and battery longevity.
-
Connectivity: Use the VictronConnect app for real-time data, performance tracking, and easy system configuration.
-
Intelligent Load Output: Safely power devices from your solar charger with automatic load disconnection if battery voltage is too low.
SmartSolar MPPT 150/70-Tr
-
Smart Solar Charge Controller: Efficiently convert solar energy into usable power with the SmartSolar MPPT 150/70-Tr, engineered to maximize energy harvest and promote long-term battery health.
-
Maximize Power Output: Benefit from ultra-fast Maximum Power Point Tracking (MPPT) that continuously optimizes energy capture—even in shaded or changing light conditions.
-
Synchronized Charging Capability: Seamlessly synchronize multiple SmartSolar MPPT units for coordinated charging stages, improving system-wide efficiency and extending battery lifespan.
-
Real-Time Monitoring and Configuration: Built-in Bluetooth connectivity allows access via the VictronConnect app for real-time system data, 30-day performance history, firmware updates, and custom settings.
-
Intelligent Load Output Protection: Protect your batteries by setting a custom low-voltage disconnect threshold, ensuring connected devices shut off safely before draining the battery too far.
SmartSolar MPPT 250/70-Tr VE.Can
- Ultra-Fast Maximum Power Point Tracking: Connects to a 250V Voc PV array and charges 12, 24, or 48V batteries with a 70A charge current.
- Remote Control via VictronConnect: Remotely configure, monitor, and manage settings like battery and PV voltage, current, and historical data through Bluetooth.
- Daisy Chain Multiple Units: Daisy chain additional units with CAN bus ports for synchronized charging and data sharing to a GX monitoring device.
- Remote Monitoring with VRM: Monitor and control your system remotely via the Victron Remote Management Portal (VRM) when connected to the internet.
- SmartSolar Control Display: Equipped with VE.Direct port for single unit or streetlight control. The remote on/off connector can be controlled externally by third-party devices like lithium batteries.
SmartSolar MPPT 75/10 Retail
-
Smart Solar Charging: Converts every bit of sunlight into usable power while preserving battery health for longer life.
-
Maximized Power Output: Ultra-fast MPPT tracking ensures optimal energy harvest even in partially shaded conditions.
-
Synchronized Multi-Charger Support: Sync multiple MPPT controllers for unified charging stages and enhanced system efficiency.
-
Easy Connectivity: Monitor and configure via VictronConnect app—access real-time data, history, and customizable settings.
-
Intelligent Load Management: Built-in load output disconnects at low voltage to prevent over-draining and protect battery life.
French 
English