SmartSolar MPPT 250/85-Tr VE.Can
$761.05
- Remote Control via VictronConnect: Easily manage and monitor your MPPT 250/85 VE.Can charger through Bluetooth via the VictronConnect app, with at-a-glance data on battery and PV voltages, currents, and historical info.
- Daisy Chain Multiple Units: Use CAN bus ports to daisy chain additional chargers, synchronizing their charge stages and sharing data with a single cable to a GX monitoring device.
- Remote Monitoring with VRM: Access full control and monitoring capabilities via the Victron Remote Management Portal (VRM) when connected to the internet.
- SmartSolar Control Display: Equipped with a VE.Direct port for unit monitoring or streetlight control. The remote on/off feature allows control by third-party devices, such as lithium batteries.
High-Efficiency Solar Charging
The Victron SmartSolar MPPT 250/85-Tr VE.Can charger uses advanced MPPT technology to efficiently convert solar energy into optimal battery charging. It supports a maximum Voc of 250V and can charge 12V, 24V, or 48V battery banks with up to 85A of charge current. With Bluetooth connectivity through the VictronConnect app, users can remotely manage and monitor the device, access real-time data on battery and PV voltage, current, and historical performance.
| Weight | 4.5 lbs |
|---|---|
| Dimensions | 16 × 33 × 29 in |
Related products
BlueSolar MPPT 250/100-Tr VE.Can
-
Efficient Solar Power Conversion: Maximize your solar energy harvest with the latest MPPT technology that intelligently converts solar energy into stored power in the shortest time.
-
Deep Battery Recharge: Capable of charging a severely depleted battery with a voltage as low as 0V (provided the cells are not permanently damaged or sulphated).
-
Advanced MPPT Technology: Constantly monitors the voltage and current from your solar panels to ensure every bit of available power is collected and stored efficiently.
-
Remote Monitoring and Control: Easily control and monitor the performance of your system via Bluetooth using VictronConnect on your smartphone or device, no matter where you are.
-
Intelligent Load Output Protection: Prevents over-draining your battery by automatically disconnecting the load when the battery voltage falls below a user-configured level, preserving battery life.
SmartSolar MPPT 100/20 (up to 48V) Retail
-
Smart Solar Charging: Efficiently converts every bit of sunlight into usable energy while optimizing battery longevity.
-
Maximize Power Output: Lightning-fast MPPT tracking ensures the maximum possible power output, even under partially shaded conditions.
-
Synchronized Charging: Sync multiple SmartSolar MPPT controllers to work as one, improving energy efficiency and enhancing system performance.
-
Connectivity: Use the VictronConnect app for real-time data, 30-day performance history, device configuration, and firmware updates.
-
Intelligent Load Output: Safely power devices directly from the solar charger while preventing battery drain by disconnecting loads at low voltage.
SmartSolar MPPT 100/50
-
Smart Solar Charge Controller: Convert every ray of sunlight into usable energy, optimizing battery life.
-
Maximize Power Output: Ultra-fast MPPT tracking ensures maximum energy harvest, even with partially shaded panels.
-
Synchronized Charging: Sync multiple controllers for unified charge stages, boosting system efficiency and battery longevity.
-
Connectivity: Use the VictronConnect app for real-time data, performance tracking, and easy system configuration.
-
Intelligent Load Output: Safely power devices from your solar charger with automatic load disconnection if battery voltage is too low.
SmartSolar MPPT 150/60-Tr
-
Smart Solar Charging: Designed for maximum efficiency, the SmartSolar MPPT 150/60-Tr converts every ray of sunlight into usable power while maintaining optimal battery health over time.
-
Optimized Energy Harvesting: The ultra-fast MPPT algorithm tracks the optimal power point in real time—even during partial shading—ensuring you get the most from your solar panels.
-
Synchronized Charging Support: When used with other SmartSolar controllers, the 150/60-Tr supports synchronized charge stages, promoting consistent and extended battery life across your system.
-
Advanced Remote Connectivity: Built-in Bluetooth and VictronConnect app support allow you to monitor real-time stats, review performance history, update firmware, and customize settings on the go.
-
Protective Load Output Control: Configure the controller to disconnect loads at a defined voltage, protecting your battery from over-discharge and enhancing long-term performance.
SmartSolar MPPT 150/70-Tr VE.Can
- Ultra-Fast Maximum Power Point Tracking: Automatically detects and charges your 12, 24, or 48V battery bank with adjustable current settings from 70A to 100A.
- Fully Programmable Charge Settings: Supports various battery chemistries, including lead-acid and lithium, for customized charging.
- Remote Control via VictronConnect: Manage and monitor settings, battery voltage, PV voltage, and historical data through Bluetooth and the VictronConnect app.
- Daisy Chain Multiple Units: Connect multiple VE.Can SmartSolar chargers via CAN bus for synchronized charging and single data reporting.
- Remote Monitoring via VRM: Monitor your system remotely via the Victron Remote Management Portal or, for off-grid use, through the GlobalLink 520.
- SmartSolar Control Display
Equipped with a VE.Direct port for single unit monitoring or streetlight control, with optional LCD display for live data and control.
SmartSolar MPPT 250/70-Tr
Smart Solar Charge Controller: Efficiently converts solar power into stored energy while enhancing battery longevity.
Maximize Power Output: Tracks the optimal power point to ensure maximum energy yield, even in low light or shade.
Synchronized Charging for Multi-Unit Setups: Synchronizes multiple units to optimize charging efficiency and battery health.
Comprehensive Connectivity: Monitor and control your system via the VictronConnect app with Bluetooth.
Intelligent Load Output Protection: Automatically disconnects loads when battery voltage drops below a set threshold.
SmartSolar MPPT 75/15 Retail
-
Smart charging technology ensures efficient solar energy conversion while optimizing battery longevity
-
Ultra-fast Maximum Power Point Tracking (MPPT) maximizes output, even in shaded or low-light conditions
-
Multiple SmartSolar controllers can synchronize for balanced, system-wide charging
-
VictronConnect app provides real-time monitoring, 30-day history, and easy device configuration
-
Intelligent load output disconnects loads automatically to prevent excessive battery drain
