SmartSolar MPPT 250/100-Tr VE.Can
$849.41
- Ultra Fast Maximum Power Point Tracking: Automatically detects and charges your 12, 24, or 48V battery bank with a charge current of 100A, connected to a PV array with a maximum voltage of 250V Voc.
- Remote Control via VictronConnect: Remotely control and configure your charger via Bluetooth using the VictronConnect app, providing real-time data like battery voltage, PV voltage, and historical performance.
- Daisy Chain Multiple Units: Easily connect additional VE.Can SmartSolar chargers using CAN bus ports. Synchronize charge stages and share data with a single cable connected to a GX monitoring device.
- Remote Monitoring with VRM: When connected to the internet, use the Victron Remote Management Portal (VRM) for full control and monitoring of your solar charger.
- SmartSolar Control Display: The VE.Can SmartSolar charger features a VE.Direct port for monitoring or streetlight control. The remote on/off function is compatible with third-party devices like lithium batteries.
Powerful Solar Charging Solution
The Victron SmartSolar MPPT 250/100-Tr VE.Can efficiently converts solar energy to charge your battery bank with up to 100A of current. It supports a maximum PV array voltage of 250V and is compatible with 12V, 24V, or 48V battery banks. Through Bluetooth connectivity, the VictronConnect app allows remote control and monitoring of the system, providing real-time data on battery and PV voltage, current, and historical performance for optimal energy management.
| Weight | 4.5 lbs |
|---|---|
| Dimensions | 16 × 33 × 29 in |
Related products
SmartSolar MPPT 100/15 Retail
-
Smart Solar Charge Controller: Charge your batteries efficiently with the Victron Energy SmartSolar MPPT controller, ensuring optimal energy conversion from every ray of sunlight while extending battery life.
-
Maximize Power Output: Advanced MPPT technology continuously tracks the optimal voltage and current to extract maximum energy, even in partially shaded or changing light conditions.
-
Synchronized Charging: Multiple SmartSolar controllers can operate in sync, optimizing the charging process across all units and enhancing system-wide battery performance.
-
Connectivity via VictronConnect: Built-in Bluetooth allows you to monitor and configure your system in real time using the VictronConnect app, with access to performance history and settings customization.
-
Intelligent Load Output: Protect your batteries by configuring load disconnection thresholds. The controller will automatically shut down connected devices if voltage drops too low, preventing deep discharge.
SmartSolar MPPT 100/20 (up to 48V) Retail
-
Smart Solar Charging: Efficiently converts every bit of sunlight into usable energy while optimizing battery longevity.
-
Maximize Power Output: Lightning-fast MPPT tracking ensures the maximum possible power output, even under partially shaded conditions.
-
Synchronized Charging: Sync multiple SmartSolar MPPT controllers to work as one, improving energy efficiency and enhancing system performance.
-
Connectivity: Use the VictronConnect app for real-time data, 30-day performance history, device configuration, and firmware updates.
-
Intelligent Load Output: Safely power devices directly from the solar charger while preventing battery drain by disconnecting loads at low voltage.
SmartSolar MPPT 100/50
-
Smart Solar Charge Controller: Convert every ray of sunlight into usable energy, optimizing battery life.
-
Maximize Power Output: Ultra-fast MPPT tracking ensures maximum energy harvest, even with partially shaded panels.
-
Synchronized Charging: Sync multiple controllers for unified charge stages, boosting system efficiency and battery longevity.
-
Connectivity: Use the VictronConnect app for real-time data, performance tracking, and easy system configuration.
-
Intelligent Load Output: Safely power devices from your solar charger with automatic load disconnection if battery voltage is too low.
SmartSolar MPPT 150/45
-
Smart Solar Charge Controller: Harness solar energy efficiently with the Victron Energy SmartSolar MPPT controller. It converts sunlight into usable power while enhancing battery lifespan through optimized charging.
-
Maximize Power Output: Advanced MPPT technology ensures the highest possible energy harvest—even in cloudy or partially shaded conditions—thanks to intelligent tracking and fast response.
-
Synchronized Charging: Use multiple SmartSolar controllers in parallel to synchronize charging stages. This boosts system efficiency and promotes balanced battery health.
-
User-Friendly Connectivity: With built-in Bluetooth and the VictronConnect app, you can monitor real-time performance, access 30-day history, adjust settings, update firmware, and set alarms easily.
-
Intelligent Load Output: Automatically disconnects loads at preset voltage levels to prevent battery over-discharge. Keeps your batteries protected and your power system running reliably.
SmartSolar MPPT 150/60-Tr
-
Smart Solar Charging: Designed for maximum efficiency, the SmartSolar MPPT 150/60-Tr converts every ray of sunlight into usable power while maintaining optimal battery health over time.
-
Optimized Energy Harvesting: The ultra-fast MPPT algorithm tracks the optimal power point in real time—even during partial shading—ensuring you get the most from your solar panels.
-
Synchronized Charging Support: When used with other SmartSolar controllers, the 150/60-Tr supports synchronized charge stages, promoting consistent and extended battery life across your system.
-
Advanced Remote Connectivity: Built-in Bluetooth and VictronConnect app support allow you to monitor real-time stats, review performance history, update firmware, and customize settings on the go.
-
Protective Load Output Control: Configure the controller to disconnect loads at a defined voltage, protecting your battery from over-discharge and enhancing long-term performance.
SmartSolar MPPT 150/70-Tr
-
Smart Solar Charge Controller: Efficiently convert solar energy into usable power with the SmartSolar MPPT 150/70-Tr, engineered to maximize energy harvest and promote long-term battery health.
-
Maximize Power Output: Benefit from ultra-fast Maximum Power Point Tracking (MPPT) that continuously optimizes energy capture—even in shaded or changing light conditions.
-
Synchronized Charging Capability: Seamlessly synchronize multiple SmartSolar MPPT units for coordinated charging stages, improving system-wide efficiency and extending battery lifespan.
-
Real-Time Monitoring and Configuration: Built-in Bluetooth connectivity allows access via the VictronConnect app for real-time system data, 30-day performance history, firmware updates, and custom settings.
-
Intelligent Load Output Protection: Protect your batteries by setting a custom low-voltage disconnect threshold, ensuring connected devices shut off safely before draining the battery too far.
SmartSolar MPPT 150/85-Tr VE.Can
- Ultra-Fast Maximum Power Point Tracking: Connects to a 150V Voc PV array and charges 12, 24, or 48V batteries with an 85A charge current.
- Remote Control via VictronConnect: Remotely configure, monitor, and manage settings like battery and PV voltage, current, and historical data through Bluetooth.
- Daisy Chain Multiple Units: Daisy chain up to 25 units via CAN bus ports for synchronized charging and data sharing to a GX monitoring device.
- Remote Monitoring with VRM: Monitor and control your system remotely through the Victron Remote Management Portal (VRM) when connected to the internet.
- SmartSolar Control Display: Includes VE.Direct port for single unit or streetlight control. Optional pluggable LCD display for live data and setup.
- Multiple Controller Solution: Supports synchronization of up to 25 units with VE.Can for enhanced system efficiency.
English 
French