BlueSolar MPPT 75/10 Retail
$62.44
-
Ultra-Fast MPPT for optimal power tracking
-
Load Output Protection: Prevents battery over-discharge
-
Smart BatteryLife Function: Adjusts cut-off to preserve battery life
-
Remote Control: Compatible with VictronConnect and VRM for full monitoring and adjustments
Efficient Solar Energy Harvesting
This advanced solar charge controller collects energy from solar panels and stores it in your battery bank. Utilizing ultra-fast MPPT technology, it ensures maximum power capture—even under changing light conditions—delivering a complete charge in the shortest time possible. Built-in features protect battery health and extend its lifespan.
| Weight | 0.36 lbs |
|---|---|
| Dimensions | 5 × 21 × 15 in |
Related products
BlueSolar MPPT 250/100-Tr VE.Can
-
Efficient Solar Power Conversion: Maximize your solar energy harvest with the latest MPPT technology that intelligently converts solar energy into stored power in the shortest time.
-
Deep Battery Recharge: Capable of charging a severely depleted battery with a voltage as low as 0V (provided the cells are not permanently damaged or sulphated).
-
Advanced MPPT Technology: Constantly monitors the voltage and current from your solar panels to ensure every bit of available power is collected and stored efficiently.
-
Remote Monitoring and Control: Easily control and monitor the performance of your system via Bluetooth using VictronConnect on your smartphone or device, no matter where you are.
-
Intelligent Load Output Protection: Prevents over-draining your battery by automatically disconnecting the load when the battery voltage falls below a user-configured level, preserving battery life.
SmartSolar MPPT 150/60-Tr
-
Smart Solar Charging: Designed for maximum efficiency, the SmartSolar MPPT 150/60-Tr converts every ray of sunlight into usable power while maintaining optimal battery health over time.
-
Optimized Energy Harvesting: The ultra-fast MPPT algorithm tracks the optimal power point in real time—even during partial shading—ensuring you get the most from your solar panels.
-
Synchronized Charging Support: When used with other SmartSolar controllers, the 150/60-Tr supports synchronized charge stages, promoting consistent and extended battery life across your system.
-
Advanced Remote Connectivity: Built-in Bluetooth and VictronConnect app support allow you to monitor real-time stats, review performance history, update firmware, and customize settings on the go.
-
Protective Load Output Control: Configure the controller to disconnect loads at a defined voltage, protecting your battery from over-discharge and enhancing long-term performance.
SmartSolar MPPT 150/70-Tr VE.Can
- Ultra-Fast Maximum Power Point Tracking: Automatically detects and charges your 12, 24, or 48V battery bank with adjustable current settings from 70A to 100A.
- Fully Programmable Charge Settings: Supports various battery chemistries, including lead-acid and lithium, for customized charging.
- Remote Control via VictronConnect: Manage and monitor settings, battery voltage, PV voltage, and historical data through Bluetooth and the VictronConnect app.
- Daisy Chain Multiple Units: Connect multiple VE.Can SmartSolar chargers via CAN bus for synchronized charging and single data reporting.
- Remote Monitoring via VRM: Monitor your system remotely via the Victron Remote Management Portal or, for off-grid use, through the GlobalLink 520.
- SmartSolar Control Display
Equipped with a VE.Direct port for single unit monitoring or streetlight control, with optional LCD display for live data and control.
SmartSolar MPPT 150/85-Tr VE.Can
- Ultra-Fast Maximum Power Point Tracking: Connects to a 150V Voc PV array and charges 12, 24, or 48V batteries with an 85A charge current.
- Remote Control via VictronConnect: Remotely configure, monitor, and manage settings like battery and PV voltage, current, and historical data through Bluetooth.
- Daisy Chain Multiple Units: Daisy chain up to 25 units via CAN bus ports for synchronized charging and data sharing to a GX monitoring device.
- Remote Monitoring with VRM: Monitor and control your system remotely through the Victron Remote Management Portal (VRM) when connected to the internet.
- SmartSolar Control Display: Includes VE.Direct port for single unit or streetlight control. Optional pluggable LCD display for live data and setup.
- Multiple Controller Solution: Supports synchronization of up to 25 units with VE.Can for enhanced system efficiency.
SmartSolar MPPT 250/70-Tr
Smart Solar Charge Controller: Efficiently converts solar power into stored energy while enhancing battery longevity.
Maximize Power Output: Tracks the optimal power point to ensure maximum energy yield, even in low light or shade.
Synchronized Charging for Multi-Unit Setups: Synchronizes multiple units to optimize charging efficiency and battery health.
Comprehensive Connectivity: Monitor and control your system via the VictronConnect app with Bluetooth.
Intelligent Load Output Protection: Automatically disconnects loads when battery voltage drops below a set threshold.
SmartSolar MPPT 250/70-Tr VE.Can
- Ultra-Fast Maximum Power Point Tracking: Connects to a 250V Voc PV array and charges 12, 24, or 48V batteries with a 70A charge current.
- Remote Control via VictronConnect: Remotely configure, monitor, and manage settings like battery and PV voltage, current, and historical data through Bluetooth.
- Daisy Chain Multiple Units: Daisy chain additional units with CAN bus ports for synchronized charging and data sharing to a GX monitoring device.
- Remote Monitoring with VRM: Monitor and control your system remotely via the Victron Remote Management Portal (VRM) when connected to the internet.
- SmartSolar Control Display: Equipped with VE.Direct port for single unit or streetlight control. The remote on/off connector can be controlled externally by third-party devices like lithium batteries.
SmartSolar MPPT 75/15 Retail
-
Smart charging technology ensures efficient solar energy conversion while optimizing battery longevity
-
Ultra-fast Maximum Power Point Tracking (MPPT) maximizes output, even in shaded or low-light conditions
-
Multiple SmartSolar controllers can synchronize for balanced, system-wide charging
-
VictronConnect app provides real-time monitoring, 30-day history, and easy device configuration
-
Intelligent load output disconnects loads automatically to prevent excessive battery drain
