SmartSolar MPPT 250/85-Tr VE.Can
$761.05
- Remote Control via VictronConnect: Easily manage and monitor your MPPT 250/85 VE.Can charger through Bluetooth via the VictronConnect app, with at-a-glance data on battery and PV voltages, currents, and historical info.
- Daisy Chain Multiple Units: Use CAN bus ports to daisy chain additional chargers, synchronizing their charge stages and sharing data with a single cable to a GX monitoring device.
- Remote Monitoring with VRM: Access full control and monitoring capabilities via the Victron Remote Management Portal (VRM) when connected to the internet.
- SmartSolar Control Display: Equipped with a VE.Direct port for unit monitoring or streetlight control. The remote on/off feature allows control by third-party devices, such as lithium batteries.
High-Efficiency Solar Charging
The Victron SmartSolar MPPT 250/85-Tr VE.Can charger uses advanced MPPT technology to efficiently convert solar energy into optimal battery charging. It supports a maximum Voc of 250V and can charge 12V, 24V, or 48V battery banks with up to 85A of charge current. With Bluetooth connectivity through the VictronConnect app, users can remotely manage and monitor the device, access real-time data on battery and PV voltage, current, and historical performance.
| Poids | 4.5 livres |
|---|---|
| Dimensions | 16 × 33 × 29 pouce |
Produits similaires
BlueSolar MPPT 150/100-Tr VE.Can
-
Smarter Solar Conversion: Convert sunlight into stored energy efficiently while maintaining battery life with SmartSolar MPPT.
-
Dynamic Power Tracking: Fast MPPT response ensures peak performance in shifting sunlight or partial shading.
-
Secure Load Output Management: Automatically disconnect loads at low voltage to protect batteries and power priority devices.
-
Multi-Device Compatibility: Configure and control through VictronConnect, with performance logs and instant data feedback.
-
Expandable System Design: Pair multiple SmartSolar controllers to work together in large-scale or modular installations.
-
Auto-Adjust Charging: Adaptive algorithms optimize charging phases to suit varying battery conditions.
BlueSolar MPPT 150/60-Tr
-
Efficient Smart Charging: Harness solar power efficiently with Victron’s SmartSolar MPPT controller, intelligently managing energy to extend battery life.
-
Ultra-Fast MPPT Tracking: Even in partial shade, advanced tracking ensures optimal energy yield from every sunbeam.
-
Smart Load Output Control: Prevent battery over-discharge by configuring cut-off voltage for connected loads.
-
Multiple Unit Synchronization: Synchronize multiple MPPT controllers for coordinated charge stages and balanced energy flow.
-
App-Based Control: Easily configure, monitor, and update through VictronConnect with real-time stats and 30-day history.
-
Flexible System Integration: Seamlessly supports diverse solar setups, off-grid systems, and hybrid configurations.
BlueSolar MPPT 150/70-Tr
-
Maximize Solar Harvesting: SmartSolar uses cutting-edge MPPT tech to draw every bit of power from your panels, even in inconsistent lighting.
-
Battery-Safe Charging Logic: Adaptive charging stages help preserve battery health while maximizing performance.
-
Real-Time Monitoring: Use VictronConnect to configure and track your system from your smartphone, tablet, or computer.
-
Multi-Unit Charging Sync: Combine controllers for unified charge stage progression, ensuring better battery management.
-
Smart Load Disconnection: Protect batteries from deep discharge by setting custom low-voltage disconnect thresholds.
-
User-Friendly Configuration: Easily update settings, set alerts, and apply presets with a few taps.
BlueSolar MPPT 250/100-Tr VE.Can
-
Efficient Solar Power Conversion: Maximize your solar energy harvest with the latest MPPT technology that intelligently converts solar energy into stored power in the shortest time.
-
Deep Battery Recharge: Capable of charging a severely depleted battery with a voltage as low as 0V (provided the cells are not permanently damaged or sulphated).
-
Advanced MPPT Technology: Constantly monitors the voltage and current from your solar panels to ensure every bit of available power is collected and stored efficiently.
-
Remote Monitoring and Control: Easily control and monitor the performance of your system via Bluetooth using VictronConnect on your smartphone or device, no matter where you are.
-
Intelligent Load Output Protection: Prevents over-draining your battery by automatically disconnecting the load when the battery voltage falls below a user-configured level, preserving battery life.
SmartSolar MPPT 100/20 (up to 48V) Retail
-
Smart Solar Charging: Efficiently converts every bit of sunlight into usable energy while optimizing battery longevity.
-
Maximize Power Output: Lightning-fast MPPT tracking ensures the maximum possible power output, even under partially shaded conditions.
-
Synchronized Charging: Sync multiple SmartSolar MPPT controllers to work as one, improving energy efficiency and enhancing system performance.
-
Connectivity: Use the VictronConnect app for real-time data, 30-day performance history, device configuration, and firmware updates.
-
Intelligent Load Output: Safely power devices directly from the solar charger while preventing battery drain by disconnecting loads at low voltage.
SmartSolar MPPT 100/30
-
Smart Solar Charge Controller: Efficiently converts sunlight into usable energy, optimizing battery health and longevity.
-
Maximize Power Output: Ultra-fast MPPT tracking and intelligent charge algorithms ensure maximum power, even with partially shaded solar panels.
-
Synchronized Charging: Multiple SmartSolar controllers synchronize for unified charging, improving battery lifespan and overall system efficiency.
-
Connectivity: Monitor and configure your system via the VictronConnect app, offering real-time data, performance history, and customizable settings.
-
Intelligent Load Output: Safely power devices directly from the charger, with automatic disconnection of loads if battery voltage drops too low.
SmartSolar MPPT 150/70-Tr VE.Can
- Ultra-Fast Maximum Power Point Tracking: Automatically detects and charges your 12, 24, or 48V battery bank with adjustable current settings from 70A to 100A.
- Fully Programmable Charge Settings: Supports various battery chemistries, including lead-acid and lithium, for customized charging.
- Remote Control via VictronConnect: Manage and monitor settings, battery voltage, PV voltage, and historical data through Bluetooth and the VictronConnect app.
- Daisy Chain Multiple Units: Connect multiple VE.Can SmartSolar chargers via CAN bus for synchronized charging and single data reporting.
- Remote Monitoring via VRM: Monitor your system remotely via the Victron Remote Management Portal or, for off-grid use, through the GlobalLink 520.
- SmartSolar Control Display
Equipped with a VE.Direct port for single unit monitoring or streetlight control, with optional LCD display for live data and control.
SmartSolar MPPT 75/10 Retail
-
Smart Solar Charging: Converts every bit of sunlight into usable power while preserving battery health for longer life.
-
Maximized Power Output: Ultra-fast MPPT tracking ensures optimal energy harvest even in partially shaded conditions.
-
Synchronized Multi-Charger Support: Sync multiple MPPT controllers for unified charging stages and enhanced system efficiency.
-
Easy Connectivity: Monitor and configure via VictronConnect app—access real-time data, history, and customizable settings.
-
Intelligent Load Management: Built-in load output disconnects at low voltage to prevent over-draining and protect battery life.
French 
English