SmartSolar MPPT 250/70-Tr
$663.27
Smart Solar Charge Controller: Efficiently converts solar power into stored energy while enhancing battery longevity.
Maximize Power Output: Tracks the optimal power point to ensure maximum energy yield, even in low light or shade.
Synchronized Charging for Multi-Unit Setups: Synchronizes multiple units to optimize charging efficiency and battery health.
Comprehensive Connectivity: Monitor and control your system via the VictronConnect app with Bluetooth.
Intelligent Load Output Protection: Automatically disconnects loads when battery voltage drops below a set threshold.
Enhanced Solar Energy Management
The SmartSolar MPPT 250/70-Tr optimizes solar energy conversion by intelligently managing the charging process, ensuring maximum efficiency and extended battery life. With rapid MPPT tracking and advanced algorithms, it delivers top performance even in partially shaded conditions. Multiple controllers can be synchronized for seamless energy distribution, optimizing the entire system. The VictronConnect app provides full connectivity for real-time monitoring, performance tracking, and easy configuration. The intelligent load output feature prevents over-discharge, protecting the battery by automatically disconnecting loads when necessary.
| Poids | 3.2 livres |
|---|---|
| Dimensions | 15 × 27 × 25 pouce |
Produits similaires
BlueSolar MPPT 150/60-Tr
-
Efficient Smart Charging: Harness solar power efficiently with Victron’s SmartSolar MPPT controller, intelligently managing energy to extend battery life.
-
Ultra-Fast MPPT Tracking: Even in partial shade, advanced tracking ensures optimal energy yield from every sunbeam.
-
Smart Load Output Control: Prevent battery over-discharge by configuring cut-off voltage for connected loads.
-
Multiple Unit Synchronization: Synchronize multiple MPPT controllers for coordinated charge stages and balanced energy flow.
-
App-Based Control: Easily configure, monitor, and update through VictronConnect with real-time stats and 30-day history.
-
Flexible System Integration: Seamlessly supports diverse solar setups, off-grid systems, and hybrid configurations.
SmartSolar MPPT 100/20 (up to 48V) Retail
-
Smart Solar Charging: Efficiently converts every bit of sunlight into usable energy while optimizing battery longevity.
-
Maximize Power Output: Lightning-fast MPPT tracking ensures the maximum possible power output, even under partially shaded conditions.
-
Synchronized Charging: Sync multiple SmartSolar MPPT controllers to work as one, improving energy efficiency and enhancing system performance.
-
Connectivity: Use the VictronConnect app for real-time data, 30-day performance history, device configuration, and firmware updates.
-
Intelligent Load Output: Safely power devices directly from the solar charger while preventing battery drain by disconnecting loads at low voltage.
SmartSolar MPPT 150/45
-
Smart Solar Charge Controller: Harness solar energy efficiently with the Victron Energy SmartSolar MPPT controller. It converts sunlight into usable power while enhancing battery lifespan through optimized charging.
-
Maximize Power Output: Advanced MPPT technology ensures the highest possible energy harvest—even in cloudy or partially shaded conditions—thanks to intelligent tracking and fast response.
-
Synchronized Charging: Use multiple SmartSolar controllers in parallel to synchronize charging stages. This boosts system efficiency and promotes balanced battery health.
-
User-Friendly Connectivity: With built-in Bluetooth and the VictronConnect app, you can monitor real-time performance, access 30-day history, adjust settings, update firmware, and set alarms easily.
-
Intelligent Load Output: Automatically disconnects loads at preset voltage levels to prevent battery over-discharge. Keeps your batteries protected and your power system running reliably.
SmartSolar MPPT 150/60-Tr
-
Smart Solar Charging: Designed for maximum efficiency, the SmartSolar MPPT 150/60-Tr converts every ray of sunlight into usable power while maintaining optimal battery health over time.
-
Optimized Energy Harvesting: The ultra-fast MPPT algorithm tracks the optimal power point in real time—even during partial shading—ensuring you get the most from your solar panels.
-
Synchronized Charging Support: When used with other SmartSolar controllers, the 150/60-Tr supports synchronized charge stages, promoting consistent and extended battery life across your system.
-
Advanced Remote Connectivity: Built-in Bluetooth and VictronConnect app support allow you to monitor real-time stats, review performance history, update firmware, and customize settings on the go.
-
Protective Load Output Control: Configure the controller to disconnect loads at a defined voltage, protecting your battery from over-discharge and enhancing long-term performance.
SmartSolar MPPT 150/70-Tr
-
Smart Solar Charge Controller: Efficiently convert solar energy into usable power with the SmartSolar MPPT 150/70-Tr, engineered to maximize energy harvest and promote long-term battery health.
-
Maximize Power Output: Benefit from ultra-fast Maximum Power Point Tracking (MPPT) that continuously optimizes energy capture—even in shaded or changing light conditions.
-
Synchronized Charging Capability: Seamlessly synchronize multiple SmartSolar MPPT units for coordinated charging stages, improving system-wide efficiency and extending battery lifespan.
-
Real-Time Monitoring and Configuration: Built-in Bluetooth connectivity allows access via the VictronConnect app for real-time system data, 30-day performance history, firmware updates, and custom settings.
-
Intelligent Load Output Protection: Protect your batteries by setting a custom low-voltage disconnect threshold, ensuring connected devices shut off safely before draining the battery too far.
SmartSolar MPPT 150/85-Tr VE.Can
- Ultra-Fast Maximum Power Point Tracking: Connects to a 150V Voc PV array and charges 12, 24, or 48V batteries with an 85A charge current.
- Remote Control via VictronConnect: Remotely configure, monitor, and manage settings like battery and PV voltage, current, and historical data through Bluetooth.
- Daisy Chain Multiple Units: Daisy chain up to 25 units via CAN bus ports for synchronized charging and data sharing to a GX monitoring device.
- Remote Monitoring with VRM: Monitor and control your system remotely through the Victron Remote Management Portal (VRM) when connected to the internet.
- SmartSolar Control Display: Includes VE.Direct port for single unit or streetlight control. Optional pluggable LCD display for live data and setup.
- Multiple Controller Solution: Supports synchronization of up to 25 units with VE.Can for enhanced system efficiency.
SmartSolar MPPT 250/60-Tr
-
Smart Solar Charge Controller: Efficiently convert solar power into stored energy with the SmartSolar MPPT 250/60-Tr. Designed to optimize energy capture while maintaining battery health and longevity.
-
Maximized Power Output: Ultra-fast MPPT technology tracks the optimal power point in real time, ensuring maximum energy yield—even in low light or partially shaded conditions.
-
Multi-Unit Synchronized Charging: Integrate multiple SmartSolar MPPT controllers to charge in sync, enhancing overall system performance and improving battery life through coordinated charging stages.
-
Advanced App Connectivity: Monitor system performance, view historical data, and customize settings through the VictronConnect app via built-in Bluetooth—no additional hardware required.
-
Smart Load Management: Protect your batteries with the intelligent load output feature that disconnects power to devices automatically when voltage drops below a set threshold.
French 
English