BlueSolar MPPT 150/35
$233.26
-
Ultra-Fast MPPT Technology – Maximizes solar energy harvest even in shifting weather, ensuring efficient power conversion from panels to batteries.
-
Built-in Bluetooth – Allows direct pairing with smartphones or tablets using the VictronConnect app for easy setup and real-time data access.
-
Remote System Access via VRM – With a GX device, gain full remote access and control through the Victron Remote Management portal.
-
Supports GlobalLink 520 – Ideal for off-grid systems where internet is limited or unavailable, offering a monitoring solution in remote areas.
-
Smart Charging Optimization – Protects and extends battery life with adaptive charging strategies tailored to battery condition.
Solar charge controller
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
| Poids | 1.4 livres |
|---|---|
| Dimensions | 9 × 20.5 × 13 pouce |
Produits similaires
BlueSolar MPPT 150/100-Tr VE.Can
-
Smarter Solar Conversion: Convert sunlight into stored energy efficiently while maintaining battery life with SmartSolar MPPT.
-
Dynamic Power Tracking: Fast MPPT response ensures peak performance in shifting sunlight or partial shading.
-
Secure Load Output Management: Automatically disconnect loads at low voltage to protect batteries and power priority devices.
-
Multi-Device Compatibility: Configure and control through VictronConnect, with performance logs and instant data feedback.
-
Expandable System Design: Pair multiple SmartSolar controllers to work together in large-scale or modular installations.
-
Auto-Adjust Charging: Adaptive algorithms optimize charging phases to suit varying battery conditions.
BlueSolar MPPT 150/60-Tr
-
Efficient Smart Charging: Harness solar power efficiently with Victron’s SmartSolar MPPT controller, intelligently managing energy to extend battery life.
-
Ultra-Fast MPPT Tracking: Even in partial shade, advanced tracking ensures optimal energy yield from every sunbeam.
-
Smart Load Output Control: Prevent battery over-discharge by configuring cut-off voltage for connected loads.
-
Multiple Unit Synchronization: Synchronize multiple MPPT controllers for coordinated charge stages and balanced energy flow.
-
App-Based Control: Easily configure, monitor, and update through VictronConnect with real-time stats and 30-day history.
-
Flexible System Integration: Seamlessly supports diverse solar setups, off-grid systems, and hybrid configurations.
SmartSolar MPPT 100/50
-
Smart Solar Charge Controller: Convert every ray of sunlight into usable energy, optimizing battery life.
-
Maximize Power Output: Ultra-fast MPPT tracking ensures maximum energy harvest, even with partially shaded panels.
-
Synchronized Charging: Sync multiple controllers for unified charge stages, boosting system efficiency and battery longevity.
-
Connectivity: Use the VictronConnect app for real-time data, performance tracking, and easy system configuration.
-
Intelligent Load Output: Safely power devices from your solar charger with automatic load disconnection if battery voltage is too low.
SmartSolar MPPT 150/100-Tr VE.Can
- Ultra-Fast Maximum Power Point Tracking: Automatically detects and charges your 12, 24, or 48V battery bank with adjustable current settings from 70A to 100A.
- Fully Programmable Charge Settings: Supports various battery chemistries, including lead-acid and lithium, for customized charging.
- Remote Control via VictronConnect: Manage and monitor settings, battery voltage, PV voltage, and historical data through Bluetooth and the VictronConnect app.
- Daisy Chain Multiple Units: Connect multiple VE.Can SmartSolar chargers via CAN bus for synchronized charging and single data reporting.
- Remote Monitoring via VRM: Monitor your system remotely via the Victron Remote Management Portal or, for off-grid use, through the GlobalLink 520.
- SmartSolar Control Display: Equipped with a VE.Direct port for single unit monitoring or streetlight control, with optional LCD display for live data and control.
SmartSolar MPPT 150/60-Tr
-
Smart Solar Charging: Designed for maximum efficiency, the SmartSolar MPPT 150/60-Tr converts every ray of sunlight into usable power while maintaining optimal battery health over time.
-
Optimized Energy Harvesting: The ultra-fast MPPT algorithm tracks the optimal power point in real time—even during partial shading—ensuring you get the most from your solar panels.
-
Synchronized Charging Support: When used with other SmartSolar controllers, the 150/60-Tr supports synchronized charge stages, promoting consistent and extended battery life across your system.
-
Advanced Remote Connectivity: Built-in Bluetooth and VictronConnect app support allow you to monitor real-time stats, review performance history, update firmware, and customize settings on the go.
-
Protective Load Output Control: Configure the controller to disconnect loads at a defined voltage, protecting your battery from over-discharge and enhancing long-term performance.
SmartSolar MPPT 150/70-Tr
-
Smart Solar Charge Controller: Efficiently convert solar energy into usable power with the SmartSolar MPPT 150/70-Tr, engineered to maximize energy harvest and promote long-term battery health.
-
Maximize Power Output: Benefit from ultra-fast Maximum Power Point Tracking (MPPT) that continuously optimizes energy capture—even in shaded or changing light conditions.
-
Synchronized Charging Capability: Seamlessly synchronize multiple SmartSolar MPPT units for coordinated charging stages, improving system-wide efficiency and extending battery lifespan.
-
Real-Time Monitoring and Configuration: Built-in Bluetooth connectivity allows access via the VictronConnect app for real-time system data, 30-day performance history, firmware updates, and custom settings.
-
Intelligent Load Output Protection: Protect your batteries by setting a custom low-voltage disconnect threshold, ensuring connected devices shut off safely before draining the battery too far.
SmartSolar MPPT 150/70-Tr VE.Can
- Ultra-Fast Maximum Power Point Tracking: Automatically detects and charges your 12, 24, or 48V battery bank with adjustable current settings from 70A to 100A.
- Fully Programmable Charge Settings: Supports various battery chemistries, including lead-acid and lithium, for customized charging.
- Remote Control via VictronConnect: Manage and monitor settings, battery voltage, PV voltage, and historical data through Bluetooth and the VictronConnect app.
- Daisy Chain Multiple Units: Connect multiple VE.Can SmartSolar chargers via CAN bus for synchronized charging and single data reporting.
- Remote Monitoring via VRM: Monitor your system remotely via the Victron Remote Management Portal or, for off-grid use, through the GlobalLink 520.
- SmartSolar Control Display
Equipped with a VE.Direct port for single unit monitoring or streetlight control, with optional LCD display for live data and control.
SmartSolar MPPT 75/15 Retail
-
Smart charging technology ensures efficient solar energy conversion while optimizing battery longevity
-
Ultra-fast Maximum Power Point Tracking (MPPT) maximizes output, even in shaded or low-light conditions
-
Multiple SmartSolar controllers can synchronize for balanced, system-wide charging
-
VictronConnect app provides real-time monitoring, 30-day history, and easy device configuration
-
Intelligent load output disconnects loads automatically to prevent excessive battery drain
French 
English