SmartSolar MPPT 250/70-Tr VE.Can
$708.04
- Ultra-Fast Maximum Power Point Tracking: Connects to a 250V Voc PV array and charges 12, 24, or 48V batteries with a 70A charge current.
- Remote Control via VictronConnect: Remotely configure, monitor, and manage settings like battery and PV voltage, current, and historical data through Bluetooth.
- Daisy Chain Multiple Units: Daisy chain additional units with CAN bus ports for synchronized charging and data sharing to a GX monitoring device.
- Remote Monitoring with VRM: Monitor and control your system remotely via the Victron Remote Management Portal (VRM) when connected to the internet.
- SmartSolar Control Display: Equipped with VE.Direct port for single unit or streetlight control. The remote on/off connector can be controlled externally by third-party devices like lithium batteries.
Advanced Solar Charging
The Victron SmartSolar MPPT 250/70-Tr VE.Can charger leverages cutting-edge technology to convert solar energy into efficient battery charging. With its ultra-fast MPPT, it connects to a PV array with a maximum Voc of 250V and charges 12V, 24V, or 48V battery banks with up to 70A of charge current. You can remotely control and monitor the charger through Bluetooth via the VictronConnect app, providing you with real-time data, including battery and PV voltage, current, and historical performance.
| Weight | 3.2 lbs |
|---|---|
| Dimensions | 15 × 27 × 25 in |
Related products
BlueSolar MPPT 150/70-Tr
-
Maximize Solar Harvesting: SmartSolar uses cutting-edge MPPT tech to draw every bit of power from your panels, even in inconsistent lighting.
-
Battery-Safe Charging Logic: Adaptive charging stages help preserve battery health while maximizing performance.
-
Real-Time Monitoring: Use VictronConnect to configure and track your system from your smartphone, tablet, or computer.
-
Multi-Unit Charging Sync: Combine controllers for unified charge stage progression, ensuring better battery management.
-
Smart Load Disconnection: Protect batteries from deep discharge by setting custom low-voltage disconnect thresholds.
-
User-Friendly Configuration: Easily update settings, set alerts, and apply presets with a few taps.
SmartSolar MPPT 100/15 Retail
-
Smart Solar Charge Controller: Charge your batteries efficiently with the Victron Energy SmartSolar MPPT controller, ensuring optimal energy conversion from every ray of sunlight while extending battery life.
-
Maximize Power Output: Advanced MPPT technology continuously tracks the optimal voltage and current to extract maximum energy, even in partially shaded or changing light conditions.
-
Synchronized Charging: Multiple SmartSolar controllers can operate in sync, optimizing the charging process across all units and enhancing system-wide battery performance.
-
Connectivity via VictronConnect: Built-in Bluetooth allows you to monitor and configure your system in real time using the VictronConnect app, with access to performance history and settings customization.
-
Intelligent Load Output: Protect your batteries by configuring load disconnection thresholds. The controller will automatically shut down connected devices if voltage drops too low, preventing deep discharge.
SmartSolar MPPT 150/60-Tr
-
Smart Solar Charging: Designed for maximum efficiency, the SmartSolar MPPT 150/60-Tr converts every ray of sunlight into usable power while maintaining optimal battery health over time.
-
Optimized Energy Harvesting: The ultra-fast MPPT algorithm tracks the optimal power point in real time—even during partial shading—ensuring you get the most from your solar panels.
-
Synchronized Charging Support: When used with other SmartSolar controllers, the 150/60-Tr supports synchronized charge stages, promoting consistent and extended battery life across your system.
-
Advanced Remote Connectivity: Built-in Bluetooth and VictronConnect app support allow you to monitor real-time stats, review performance history, update firmware, and customize settings on the go.
-
Protective Load Output Control: Configure the controller to disconnect loads at a defined voltage, protecting your battery from over-discharge and enhancing long-term performance.
SmartSolar MPPT 150/70-Tr
-
Smart Solar Charge Controller: Efficiently convert solar energy into usable power with the SmartSolar MPPT 150/70-Tr, engineered to maximize energy harvest and promote long-term battery health.
-
Maximize Power Output: Benefit from ultra-fast Maximum Power Point Tracking (MPPT) that continuously optimizes energy capture—even in shaded or changing light conditions.
-
Synchronized Charging Capability: Seamlessly synchronize multiple SmartSolar MPPT units for coordinated charging stages, improving system-wide efficiency and extending battery lifespan.
-
Real-Time Monitoring and Configuration: Built-in Bluetooth connectivity allows access via the VictronConnect app for real-time system data, 30-day performance history, firmware updates, and custom settings.
-
Intelligent Load Output Protection: Protect your batteries by setting a custom low-voltage disconnect threshold, ensuring connected devices shut off safely before draining the battery too far.
SmartSolar MPPT 150/70-Tr VE.Can
- Ultra-Fast Maximum Power Point Tracking: Automatically detects and charges your 12, 24, or 48V battery bank with adjustable current settings from 70A to 100A.
- Fully Programmable Charge Settings: Supports various battery chemistries, including lead-acid and lithium, for customized charging.
- Remote Control via VictronConnect: Manage and monitor settings, battery voltage, PV voltage, and historical data through Bluetooth and the VictronConnect app.
- Daisy Chain Multiple Units: Connect multiple VE.Can SmartSolar chargers via CAN bus for synchronized charging and single data reporting.
- Remote Monitoring via VRM: Monitor your system remotely via the Victron Remote Management Portal or, for off-grid use, through the GlobalLink 520.
- SmartSolar Control Display
Equipped with a VE.Direct port for single unit monitoring or streetlight control, with optional LCD display for live data and control.
SmartSolar MPPT 250/60-Tr
-
Smart Solar Charge Controller: Efficiently convert solar power into stored energy with the SmartSolar MPPT 250/60-Tr. Designed to optimize energy capture while maintaining battery health and longevity.
-
Maximized Power Output: Ultra-fast MPPT technology tracks the optimal power point in real time, ensuring maximum energy yield—even in low light or partially shaded conditions.
-
Multi-Unit Synchronized Charging: Integrate multiple SmartSolar MPPT controllers to charge in sync, enhancing overall system performance and improving battery life through coordinated charging stages.
-
Advanced App Connectivity: Monitor system performance, view historical data, and customize settings through the VictronConnect app via built-in Bluetooth—no additional hardware required.
-
Smart Load Management: Protect your batteries with the intelligent load output feature that disconnects power to devices automatically when voltage drops below a set threshold.
