BlueSolar MPPT 150/60-Tr
$441.89
-
Efficient Smart Charging: Harness solar power efficiently with Victron’s SmartSolar MPPT controller, intelligently managing energy to extend battery life.
-
Ultra-Fast MPPT Tracking: Even in partial shade, advanced tracking ensures optimal energy yield from every sunbeam.
-
Smart Load Output Control: Prevent battery over-discharge by configuring cut-off voltage for connected loads.
-
Multiple Unit Synchronization: Synchronize multiple MPPT controllers for coordinated charge stages and balanced energy flow.
-
App-Based Control: Easily configure, monitor, and update through VictronConnect with real-time stats and 30-day history.
-
Flexible System Integration: Seamlessly supports diverse solar setups, off-grid systems, and hybrid configurations.
MPPT Solar Charger – Intelligent Energy Harvesting
This advanced MPPT solar charge controller collects power from your solar panels and efficiently stores it in your batteries. With high-speed tracking, it ensures maximum energy harvest and extends battery life by maintaining a consistent, optimal charge.
Unlike basic PWM models that directly link panel voltage to battery voltage, MPPT controllers intelligently regulate voltage, allowing a higher voltage panel array to charge lower voltage batteries with minimal power loss. This results in better performance, especially in cooler or changing climates. It’s ideal for larger arrays, where wiring efficiency and power optimization matter most.
| Weight | 3.88 lbs |
|---|---|
| Dimensions | 15 × 27 × 25 in |
Related products
BlueSolar MPPT 150/35
-
Ultra-Fast MPPT Technology – Maximizes solar energy harvest even in shifting weather, ensuring efficient power conversion from panels to batteries.
-
Built-in Bluetooth – Allows direct pairing with smartphones or tablets using the VictronConnect app for easy setup and real-time data access.
-
Remote System Access via VRM – With a GX device, gain full remote access and control through the Victron Remote Management portal.
-
Supports GlobalLink 520 – Ideal for off-grid systems where internet is limited or unavailable, offering a monitoring solution in remote areas.
-
Smart Charging Optimization – Protects and extends battery life with adaptive charging strategies tailored to battery condition.
BlueSolar MPPT 150/45
-
MPPT with Real-Time Tracking – Constantly tracks PV voltage and current to capture every possible watt from your solar panels.
-
Bluetooth Enabled Monitoring – No dongle needed—built-in Bluetooth connects instantly to your device using VictronConnect.
-
Remote Monitoring via VRM Portal – Monitor your solar system remotely through the internet, ideal for professional or residential setups.
-
Off-Grid Ready with GlobalLink 520 – Enables remote data tracking even in isolated locations without wired internet access.
-
Battery Management Features – Advanced charging algorithms ensure your batteries remain protected and charged efficiently.
-
Cloud-Adaptive Performance – Especially effective during fluctuating light conditions, maximizing efficiency even on cloudy days.
BlueSolar MPPT 150/70-Tr
-
Maximize Solar Harvesting: SmartSolar uses cutting-edge MPPT tech to draw every bit of power from your panels, even in inconsistent lighting.
-
Battery-Safe Charging Logic: Adaptive charging stages help preserve battery health while maximizing performance.
-
Real-Time Monitoring: Use VictronConnect to configure and track your system from your smartphone, tablet, or computer.
-
Multi-Unit Charging Sync: Combine controllers for unified charge stage progression, ensuring better battery management.
-
Smart Load Disconnection: Protect batteries from deep discharge by setting custom low-voltage disconnect thresholds.
-
User-Friendly Configuration: Easily update settings, set alerts, and apply presets with a few taps.
BlueSolar MPPT 250/100-Tr VE.Can
-
Efficient Solar Power Conversion: Maximize your solar energy harvest with the latest MPPT technology that intelligently converts solar energy into stored power in the shortest time.
-
Deep Battery Recharge: Capable of charging a severely depleted battery with a voltage as low as 0V (provided the cells are not permanently damaged or sulphated).
-
Advanced MPPT Technology: Constantly monitors the voltage and current from your solar panels to ensure every bit of available power is collected and stored efficiently.
-
Remote Monitoring and Control: Easily control and monitor the performance of your system via Bluetooth using VictronConnect on your smartphone or device, no matter where you are.
-
Intelligent Load Output Protection: Prevents over-draining your battery by automatically disconnecting the load when the battery voltage falls below a user-configured level, preserving battery life.
SmartSolar MPPT 150/35
-
Smart Solar Charge Controller: Efficiently converts solar energy into usable power while optimizing battery health and lifespan.
-
Maximize Power Output: Advanced MPPT technology ensures maximum power harvest, even in shaded or low-light conditions.
-
Synchronized Charging: Supports multiple MPPT controllers working together to ensure system-wide battery charging consistency.
-
Connectivity: Monitor and configure settings via the VictronConnect app with real-time data, performance logs, and system alerts.
-
Intelligent Load Output: Automatically disconnects loads when battery voltage is low to protect batteries from deep discharge.
SmartSolar MPPT 150/60-Tr
-
Smart Solar Charging: Designed for maximum efficiency, the SmartSolar MPPT 150/60-Tr converts every ray of sunlight into usable power while maintaining optimal battery health over time.
-
Optimized Energy Harvesting: The ultra-fast MPPT algorithm tracks the optimal power point in real time—even during partial shading—ensuring you get the most from your solar panels.
-
Synchronized Charging Support: When used with other SmartSolar controllers, the 150/60-Tr supports synchronized charge stages, promoting consistent and extended battery life across your system.
-
Advanced Remote Connectivity: Built-in Bluetooth and VictronConnect app support allow you to monitor real-time stats, review performance history, update firmware, and customize settings on the go.
-
Protective Load Output Control: Configure the controller to disconnect loads at a defined voltage, protecting your battery from over-discharge and enhancing long-term performance.
SmartSolar MPPT 250/70-Tr VE.Can
- Ultra-Fast Maximum Power Point Tracking: Connects to a 250V Voc PV array and charges 12, 24, or 48V batteries with a 70A charge current.
- Remote Control via VictronConnect: Remotely configure, monitor, and manage settings like battery and PV voltage, current, and historical data through Bluetooth.
- Daisy Chain Multiple Units: Daisy chain additional units with CAN bus ports for synchronized charging and data sharing to a GX monitoring device.
- Remote Monitoring with VRM: Monitor and control your system remotely via the Victron Remote Management Portal (VRM) when connected to the internet.
- SmartSolar Control Display: Equipped with VE.Direct port for single unit or streetlight control. The remote on/off connector can be controlled externally by third-party devices like lithium batteries.
