BlueSolar MPPT 150/45
$279.21
-
MPPT with Real-Time Tracking – Constantly tracks PV voltage and current to capture every possible watt from your solar panels.
-
Bluetooth Enabled Monitoring – No dongle needed—built-in Bluetooth connects instantly to your device using VictronConnect.
-
Remote Monitoring via VRM Portal – Monitor your solar system remotely through the internet, ideal for professional or residential setups.
-
Off-Grid Ready with GlobalLink 520 – Enables remote data tracking even in isolated locations without wired internet access.
-
Battery Management Features – Advanced charging algorithms ensure your batteries remain protected and charged efficiently.
-
Cloud-Adaptive Performance – Especially effective during fluctuating light conditions, maximizing efficiency even on cloudy days.
Solar charge controller
A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.
The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
| Weight | 1.4 lbs |
|---|---|
| Dimensions | 9 × 20.5 × 13 in |
Related products
BlueSolar MPPT 100/30
-
Ultra-Fast MPPT Technology – Continuously tracks solar panel performance to extract the maximum available energy, especially effective during shifting light conditions.
-
Remote Monitoring via VictronConnect – Connect a Bluetooth dongle and use the VictronConnect app to configure and view system performance on your smartphone.
-
VRM Portal Integration – When linked to a GX device, monitor and control your system remotely through the free Victron Remote Management website.
-
GlobalLink 520 Compatibility – Supports off-grid remote monitoring even when no internet is available on-site.
-
Improved Battery Health – Features like BatteryLife help maintain battery condition by optimizing charge/discharge cycles.
-
Efficient Energy Harvesting – Smart algorithms ensure that even in low light or cloudy conditions, your system collects maximum solar energy.
SmartSolar MPPT 150/45
-
Smart Solar Charge Controller: Harness solar energy efficiently with the Victron Energy SmartSolar MPPT controller. It converts sunlight into usable power while enhancing battery lifespan through optimized charging.
-
Maximize Power Output: Advanced MPPT technology ensures the highest possible energy harvest—even in cloudy or partially shaded conditions—thanks to intelligent tracking and fast response.
-
Synchronized Charging: Use multiple SmartSolar controllers in parallel to synchronize charging stages. This boosts system efficiency and promotes balanced battery health.
-
User-Friendly Connectivity: With built-in Bluetooth and the VictronConnect app, you can monitor real-time performance, access 30-day history, adjust settings, update firmware, and set alarms easily.
-
Intelligent Load Output: Automatically disconnects loads at preset voltage levels to prevent battery over-discharge. Keeps your batteries protected and your power system running reliably.
SmartSolar MPPT 150/60-Tr
-
Smart Solar Charging: Designed for maximum efficiency, the SmartSolar MPPT 150/60-Tr converts every ray of sunlight into usable power while maintaining optimal battery health over time.
-
Optimized Energy Harvesting: The ultra-fast MPPT algorithm tracks the optimal power point in real time—even during partial shading—ensuring you get the most from your solar panels.
-
Synchronized Charging Support: When used with other SmartSolar controllers, the 150/60-Tr supports synchronized charge stages, promoting consistent and extended battery life across your system.
-
Advanced Remote Connectivity: Built-in Bluetooth and VictronConnect app support allow you to monitor real-time stats, review performance history, update firmware, and customize settings on the go.
-
Protective Load Output Control: Configure the controller to disconnect loads at a defined voltage, protecting your battery from over-discharge and enhancing long-term performance.
SmartSolar MPPT 150/85-Tr VE.Can
- Ultra-Fast Maximum Power Point Tracking: Connects to a 150V Voc PV array and charges 12, 24, or 48V batteries with an 85A charge current.
- Remote Control via VictronConnect: Remotely configure, monitor, and manage settings like battery and PV voltage, current, and historical data through Bluetooth.
- Daisy Chain Multiple Units: Daisy chain up to 25 units via CAN bus ports for synchronized charging and data sharing to a GX monitoring device.
- Remote Monitoring with VRM: Monitor and control your system remotely through the Victron Remote Management Portal (VRM) when connected to the internet.
- SmartSolar Control Display: Includes VE.Direct port for single unit or streetlight control. Optional pluggable LCD display for live data and setup.
- Multiple Controller Solution: Supports synchronization of up to 25 units with VE.Can for enhanced system efficiency.
SmartSolar MPPT 250/60-Tr
-
Smart Solar Charge Controller: Efficiently convert solar power into stored energy with the SmartSolar MPPT 250/60-Tr. Designed to optimize energy capture while maintaining battery health and longevity.
-
Maximized Power Output: Ultra-fast MPPT technology tracks the optimal power point in real time, ensuring maximum energy yield—even in low light or partially shaded conditions.
-
Multi-Unit Synchronized Charging: Integrate multiple SmartSolar MPPT controllers to charge in sync, enhancing overall system performance and improving battery life through coordinated charging stages.
-
Advanced App Connectivity: Monitor system performance, view historical data, and customize settings through the VictronConnect app via built-in Bluetooth—no additional hardware required.
-
Smart Load Management: Protect your batteries with the intelligent load output feature that disconnects power to devices automatically when voltage drops below a set threshold.
SmartSolar MPPT 250/70-Tr VE.Can
- Ultra-Fast Maximum Power Point Tracking: Connects to a 250V Voc PV array and charges 12, 24, or 48V batteries with a 70A charge current.
- Remote Control via VictronConnect: Remotely configure, monitor, and manage settings like battery and PV voltage, current, and historical data through Bluetooth.
- Daisy Chain Multiple Units: Daisy chain additional units with CAN bus ports for synchronized charging and data sharing to a GX monitoring device.
- Remote Monitoring with VRM: Monitor and control your system remotely via the Victron Remote Management Portal (VRM) when connected to the internet.
- SmartSolar Control Display: Equipped with VE.Direct port for single unit or streetlight control. The remote on/off connector can be controlled externally by third-party devices like lithium batteries.
SmartSolar MPPT 75/15 Retail
-
Smart charging technology ensures efficient solar energy conversion while optimizing battery longevity
-
Ultra-fast Maximum Power Point Tracking (MPPT) maximizes output, even in shaded or low-light conditions
-
Multiple SmartSolar controllers can synchronize for balanced, system-wide charging
-
VictronConnect app provides real-time monitoring, 30-day history, and easy device configuration
-
Intelligent load output disconnects loads automatically to prevent excessive battery drain
