Batterie 12V 100Ah – PRO SERIES
Batterie 12V 100Ah volthium
Batterie 12V 200Ah – autochauffante
-
Double self‑heating system (auto + manual) extends charge range to –40 °C
-
Compact ABS 4D form (482 × 245 × 170 mm), 50 lbs, ~5× lighter than equivalent lead‑acid
-
High discharge power: 150 A continuous, 200 A peak (30 s), plus stainless steel disable‑button for parasitic discharge control
-
Accessible BMS chamber for repairability and thermal isolation; RJ45 ports for Victron/BT connectivity
-
Long‑life Grade A+ cells & TI‑based BMS, IP55 splash resilience, 10‑year warranty, ~6000‑cycle lifespan
Battery switch ON/OFF 275A
BlueSolar MPPT 100/15 Retail
BlueSolar MPPT 100/20 (up to 48V) Retail
BlueSolar MPPT 100/30
-
Ultra-Fast MPPT Technology – Continuously tracks solar panel performance to extract the maximum available energy, especially effective during shifting light conditions.
-
Remote Monitoring via VictronConnect – Connect a Bluetooth dongle and use the VictronConnect app to configure and view system performance on your smartphone.
-
VRM Portal Integration – When linked to a GX device, monitor and control your system remotely through the free Victron Remote Management website.
-
GlobalLink 520 Compatibility – Supports off-grid remote monitoring even when no internet is available on-site.
-
Improved Battery Health – Features like BatteryLife help maintain battery condition by optimizing charge/discharge cycles.
-
Efficient Energy Harvesting – Smart algorithms ensure that even in low light or cloudy conditions, your system collects maximum solar energy.
BlueSolar MPPT 100/50
-
High-Efficiency MPPT Tracking – Rapidly adjusts to changing solar conditions to maximize power output and charging speed.
-
Built-in Bluetooth Connectivity – Comes with integrated Bluetooth for easy setup and real-time monitoring via VictronConnect.
-
Full Remote Access with VRM – Pair with a GX device to view system data and make changes remotely from any device with internet access.
-
GlobalLink 520 for Remote Sites – Ideal for off-grid applications, enabling monitoring even in areas with no internet connection.
-
Adaptive Charging Algorithm – Automatically adjusts charging based on battery condition to enhance battery lifespan.
-
Reliable Under All Conditions – Performs exceptionally well even during cloud cover or fluctuating sunlight levels.
Sale products
Longi – LR7-72HGD-600M – Bifacial
Elevate your solar installations with cutting-edge design and resilience.
-
600 W output with 22.2% peak efficiency
-
Bifacial design significantly enhances rear-side energy capture
-
Half-cell layout cuts resistance and shading loss
-
Robust 30 mm silver frame, white backsheet, and MC4 connectors
-
Designed for bulk-scale deployment: 36 panels/pallet, 720/pallet container
SmartSolar MPPT 150/60-Tr
-
Smart Solar Charging: Designed for maximum efficiency, the SmartSolar MPPT 150/60-Tr converts every ray of sunlight into usable power while maintaining optimal battery health over time.
-
Optimized Energy Harvesting: The ultra-fast MPPT algorithm tracks the optimal power point in real time—even during partial shading—ensuring you get the most from your solar panels.
-
Synchronized Charging Support: When used with other SmartSolar controllers, the 150/60-Tr supports synchronized charge stages, promoting consistent and extended battery life across your system.
-
Advanced Remote Connectivity: Built-in Bluetooth and VictronConnect app support allow you to monitor real-time stats, review performance history, update firmware, and customize settings on the go.
-
Protective Load Output Control: Configure the controller to disconnect loads at a defined voltage, protecting your battery from over-discharge and enhancing long-term performance.
SmartSolar MPPT 250/85-Tr VE.Can
- Remote Control via VictronConnect: Easily manage and monitor your MPPT 250/85 VE.Can charger through Bluetooth via the VictronConnect app, with at-a-glance data on battery and PV voltages, currents, and historical info.
- Daisy Chain Multiple Units: Use CAN bus ports to daisy chain additional chargers, synchronizing their charge stages and sharing data with a single cable to a GX monitoring device.
- Remote Monitoring with VRM: Access full control and monitoring capabilities via the Victron Remote Management Portal (VRM) when connected to the internet.
- SmartSolar Control Display: Equipped with a VE.Direct port for unit monitoring or streetlight control. The remote on/off feature allows control by third-party devices, such as lithium batteries.
Orion-Tr Smart 12/24-15A (360W) Non-isolated DC-DC charger
Quattro 48/3000/35-50/50 120V VE.Bus
-
Two AC Inputs with Integrated Transfer Switch: Automatically switches between two AC sources (e.g., grid and generator) for seamless operation and efficiency.
-
Two AC Outputs: Main output ensures no-break functionality (<20ms) for sensitive devices; secondary output activates only when AC is available, preserving battery life.
-
PowerControl: Optimizes limited generator or shore power by using excess energy for battery charging, preventing overloads.
-
PowerAssist: Enhances generator or shore power capacity by drawing from the battery during peak demand for continuous operation.
-
Split Phase and Three-Phase Capability: Enables parallel operation of up to 12 units, providing up to 96W/120kVA output and 1600A charging capacity.
-
Solar Compatibility: Perfect for off-grid or grid-tied PV systems, with integrated loss-of-mains detection software.
-
Effortless System Configuration: Simple adjustments with DIP switch settings for fast customization after installation.
English 
French